Effect of Different Substitutions at the 1,7-Bay Positions of Perylenediimide Dyes on Their Optical and Laser Properties.

Perylenediimide (PDI) compounds are widely used as the active units of thin-film organic lasers. Lately, PDIs bearing two sterically hindering diphenylphenoxy groups at the 1,7-bay positions have received attention because they provide a way to red-shift the emission with respect to bay-unsubstituted PDIs, while maintaining a good amplified spontaneous emission (ASE) performance at high doping rates. Here, we report the synthesis of a series of six PDI derivatives with different aryloxy groups (PDI 6 to PDI 10) or ethoxy groups (PDI 11) at the 1,7 positions of the PDI core, together with a complete characterization of their optical properties, including absorption, photoluminescence, and ASE. We aim to stablish structure-property relationships that help designing compounds with optimized ASE performance. Film experiments were accomplished at low PDI concentrations in the film, to resemble the isolated molecule behaviour, and at a range of increasing doping rates, to investigate concentration quenching effects. Compounds PDI 10 and PDI 7, bearing substituents in the 2' positions of the benzene ring (the one contiguous to the linking oxygen atom) attached to the 1,7 positions of the PDI core, have shown a better threshold performance, which is attributed to conformational (steric) effects. Films containing PDI 11 show dual ASE.

Panchromatic Light-Capturing Bis-styryl BODIPY-Perylenediimide Donor-Acceptor Constructs: Occurrence of Sequential Energy Transfer Followed by Electron Transfer.

Invited for the cover of this issue are the groups of Fernando Fernández-Lázaro and Ángela Sastre-Santos at the Universidad Miguel Hernández, Elche, Spain, and Francis D'Souza at the University of North Texas at Denton, Texas, USA. The image depicts the structure and properties of bis-styryl BODIPY-perylenediimide donor-acceptor constructs. Read the full text of the article at 10.1002/chem.202301686.

New Highly Fluorescent Water Soluble Imidazolium-Perylenediimides: Synthesis and Cellular Response.

The synthesis and characterization of two new water soluble 2,6-bis(imidazolylmethyl)-4-methylphenoxy-containing perylenediimides, PDI-1 and PDI-2, are described. These compounds demonstrate a high fluorescence quantum yield in water and were investigated as potential photosensitizers for generating reactive oxygen species with applications in anticancer activities. The HeLa cell line (VPH18) was used to evaluate their efficacy. Fluorescence microscopy was employed to confirm the successful internalization of PDI-1 and PDI-2, while confocal microscopy revealed the specific locations of both PDIs within the lysosomes and mitochondria. In vitro studies were conducted to evaluate the anticancer activity of PDI-1 and PDI-2. Remarkably, these photosensitizers demonstrated a significant ability to selectively eliminate cancer cells when exposed to a specific light wavelength. The water solubility, high fluorescence quantum yield, and selective cytotoxicity of these PDIs toward cancer cells highlight their potential as effective agents for targeted photodynamic therapy. In conclusion, the findings presented here provide a strong foundation for the future exploration and optimization of PDI-1 and PDI-2 as effective photosensitizers in photodynamic therapy, potentially leading to improved treatment strategies for cancer patients.

Panchromatic Light-Capturing Bis-styryl BODIPY-Perylenediimide Donor-Acceptor Constructs: Occurrence of Sequential Energy Transfer Followed by Electron Transfer.

Two wide-band-capturing donor-acceptor conjugates featuring bis-styrylBODIPY and perylenediimide (PDI) have been newly synthesized, and the occurrence of ultrafast excitation transfer from the 1 PDI* to BODIPY, and a subsequent electron transfer from the 1 BODIPY* to PDI have been demonstrated. Optical absorption studies revealed panchromatic light capture but offered no evidence of ground-state interactions between the donor and acceptor entities. Steady-state fluorescence and excitation spectral recordings provided evidence of singlet-singlet energy transfer in these dyads, and quenched fluorescence of bis-styrylBODIPY emission in the dyads suggested additional photo-events. The facile oxidation of bis-styrylBODIPY and facile reduction of PDI, establishing their relative roles of electron donor and acceptor, were borne out by electrochemical studies. The electrostatic potential surfaces of the S1 and S2 states, derived from time-dependent DFT calculations, supported excited charge transfer in these dyads. Spectro-electrochemical studies on one-electron-oxidized and one-electron-reduced dyads and the monomeric precursor compounds were also performed in a thin-layer optical cell under corresponding applied potentials. From this study, both bis-styrylBODIPY⋅+ and PDI⋅- could be spectrally characterizes and were subsequently used in characterizing the electron-transfer products. Finally, pump-probe spectral studies were performed in dichlorobenzene under selective PDI and bis-styrylBODIPY excitation to secure energy and electron-transfer evidence. The measured rate constants for energy transfer, kENT , were in the range of 1011  s-1 , while the electron transfer rate constants, kET , were in the range of 1010  s-1 , thus highlighting their potential use in solar energy harvesting and optoelectronic applications.

SURGICAL TREATMENT OF CLAVICLE FRACTURES: A DESCRIPTIVE ANALYSIS OF 88 CASES.

Clavicle fractures are one of the most common types of bone injuries in adults. Recently, the treatment protocol for these fractures has undergone changes. Objective: To better understand the epidemiological and behavioral profile of these lesions when they require surgical treatment. Methods: This is an analysis of a series of cases. Our sample included individuals undergoing surgical treatment for clavicle fractures. Results: In total, 88 subjects fulfilled the predetermined criteria. Among these, 75 (85.22%) were male; automobile accidents corresponded to the largest etiological group, reaching 48% of prevalence; there was a slight predominance of the right side, totaling 45 cases (51%); most fractures were classified as Allman type I; an infection rate was observed in 1.13% of the cases; and the development of pseudarthrosis was identified in 2.27% of the patients. Conclusion: The incidence of clavicle fracture is higher in young men, mainly caused by car accidents, being mostly located in the middle third. No statistical significance was found between the synthesis material data and the postoperative complication rate, revealing the absence of risk superiority between the different types of surgical approaches used. Level of Evidence IV, Case Series.

As fraturas de clavícula consistem em um dos tipos mais comuns de lesões ósseas na população adulta. O protocolo de tratamento dessas fraturas tem sofrido modificações. Objetivo: Compreender melhor o perfil epidemiológico e comportamental das lesões de clavícula submetidas a tratamento cirúrgico. Métodos: Análise de uma série de casos, cuja amostragem incluiu indivíduos submetidos à abordagem cirúrgica de fratura de clavícula. Resultados: No total, 88 indivíduos preencheram os critérios pré-determinados. Dentre estes, 75 (85,22%) eram do sexo masculino; o acidente automobilístico correspondeu ao maior grupo etiológico (48%); houve ligeira predominância do lado direito, totalizando 45 casos (51%); a maior parte das fraturas foi classificada como Allman tipo I; observou-se uma taxa de infecção em 1,13% dos casos; e o desenvolvimento de pseudoartrose foi identificado em 2,27% dos pacientes. Conclusão: A incidência de fratura de clavícula é maior em homens jovens, ocasionada principalmente por acidentes automobilísticos, sendo, na maioria dos casos, localizada no terço médio. Não foi encontrada significância estatística entre os dados do material de síntese e o índice de complicação pós-operatória, revelando a ausência de superioridade de risco entre os diferentes tipos de abordagem cirúrgica. Nível de Evidência IV, Série de Casos.

Simple and Versatile Platforms for Manipulating Light with Matter: Strong Light-Matter Coupling in Fully Solution-Processed Optical Microcavities.

Planar microcavities with strong light-matter coupling, monolithically processed fully from solution, consisting of two polymer-based distributed Bragg reflectors (DBRs) comprising alternating layers of a high-refractive-index titanium oxide hydrate/poly(vinyl alcohol) hybrid material and a low-refractive-index fluorinated polymer are presented. The DBRs enclose a perylene diimide derivative (b-PDI-1) film positioned at the antinode of the optical mode. Strong light-matter coupling is achieved in these structures at the target excitation of the b-PDI-1. Indeed, the energy-dispersion relation (energy vs in-plane wavevector or output angle) in reflectance and the group delay of transmitted light in the microcavities show a clear anti-crossing-an energy gap between two distinct exciton-polariton dispersion branches. The agreement between classical electrodynamic simulations of the microcavity response and the experimental data demonstrates that the entire microcavity stack can be controllably produced as designed. Promisingly, the refractive index of the inorganic/organic hybrid layers used in the microcavity DBRs can be precisely manipulated between values of 1.50 to 2.10. Hence, microcavities with a wide spectral range of optical modes might be designed and produced with straightforward coating methodologies, enabling fine-tuning of the energy and lifetime of the microcavities' optical modes to harness strong light-matter coupling in a wide variety of solution processable active materials.

Enhancing SARS-CoV-2 Surveillance through Regular Genomic Sequencing in Spain: The RELECOV Network.

Millions of SARS-CoV-2 whole genome sequences have been generated to date. However, good quality data and adequate surveillance systems are required to contribute to meaningful surveillance in public health. In this context, the network of Spanish laboratories for coronavirus (RELECOV) was created with the main goal of promoting actions to speed up the detection, analyses, and evaluation of SARS-CoV-2 at a national level, partially structured and financed by an ECDC-HERA-Incubator action (ECDC/GRANT/2021/024). A SARS-CoV-2 sequencing quality control assessment (QCA) was developed to evaluate the network's technical capacity. QCA full panel results showed a lower hit rate for lineage assignment compared to that obtained for variants. Genomic data comprising 48,578 viral genomes were studied and evaluated to monitor SARS-CoV-2. The developed network actions showed a 36% increase in sharing viral sequences. In addition, analysis of lineage/sublineage-defining mutations to track the virus showed characteristic mutation profiles for the Delta and Omicron variants. Further, phylogenetic analyses strongly correlated with different variant clusters, obtaining a robust reference tree. The RELECOV network has made it possible to improve and enhance the genomic surveillance of SARS-CoV-2 in Spain. It has provided and evaluated genomic tools for viral genome monitoring and characterization that make it possible to increase knowledge efficiently and quickly, promoting the genomic surveillance of SARS-CoV-2 in Spain.

Disentangling Excimer Emission from Chiral Induction in Nanoscale Helical Silica Scaffolds Bearing Achiral Chromophores.

The synthesis and characterization of diketopyrrolopyrroles and perylenemonoimidodiesters linked to a substituted benzoic acid in the ortho, meta, and para positions, are reported. Grafting of these dyes on the surface of chiral silica nanohelices is used to probe how the morphology of the platform at the mesoscopic level affects the induction of chiroptical properties onto achiral molecular chromophores. The grafted structures are weakly (diketopyrrolopyrroles) or strongly (perylenemonoimidodiesters) emissive, exhibiting both locally-excited state emission and a broad, structureless emission assigned to excimers. The dissymmetry factors obtained using circular dichroism highlight optimized supramolecular organization between the chromophores for enhancing the chiroptical properties of the system. In the ortho- derivatives, poor organization due to steric hindrance is reflected in a low density of chromophores on walls of the silica-nanostructures (<0.1 vs. >0.3 and up to 0.6 molecules/nm2 for the ortho and meta or para derivatives, respectively) and lower gabs values than in the other derivatives (gabs <2×10-5 vs 6×10-5 for the ortho and para derivatives, respectively). The para derivatives presented a better organization and increased values of gabs . All grafted chromophores evidence varying degrees of excimer emission which was not found to directly correlate to their grafting density.

Surgical treatment of clavicle fractures: a descriptive analysis of 88 cases / Tratamento cirúrgico das fraturas de clavícula: uma análise descritiva de 88 casos

ABSTRACT Clavicle fractures are one of the most common types of bone injuries in adults. Recently, the treatment protocol for these fractures has undergone changes. Objective: To better understand the epidemiological and behavioral profile of these lesions when they require surgical treatment. Methods: This is an analysis of a series of cases. Our sample included individuals undergoing surgical treatment for clavicle fractures. Results: In total, 88 subjects fulfilled the predetermined criteria. Among these, 75 (85.22%) were male; automobile accidents corresponded to the largest etiological group, reaching 48% of prevalence; there was a slight predominance of the right side, totaling 45 cases (51%); most fractures were classified as Allman type I; an infection rate was observed in 1.13% of the cases; and the development of pseudarthrosis was identified in 2.27% of the patients. Conclusion: The incidence of clavicle fracture is higher in young men, mainly caused by car accidents, being mostly located in the middle third. No statistical significance was found between the synthesis material data and the postoperative complication rate, revealing the absence of risk superiority between the different types of surgical approaches used. Level of Evidence IV, Case Series.

RESUMO As fraturas de clavícula consistem em um dos tipos mais comuns de lesões ósseas na população adulta. O protocolo de tratamento dessas fraturas tem sofrido modificações. Objetivo: Compreender melhor o perfil epidemiológico e comportamental das lesões de clavícula submetidas a tratamento cirúrgico. Métodos: Análise de uma série de casos, cuja amostragem incluiu indivíduos submetidos à abordagem cirúrgica de fratura de clavícula. Resultados: No total, 88 indivíduos preencheram os critérios pré-determinados. Dentre estes, 75 (85,22%) eram do sexo masculino; o acidente automobilístico correspondeu ao maior grupo etiológico (48%); houve ligeira predominância do lado direito, totalizando 45 casos (51%); a maior parte das fraturas foi classificada como Allman tipo I; observou-se uma taxa de infecção em 1,13% dos casos; e o desenvolvimento de pseudoartrose foi identificado em 2,27% dos pacientes. Conclusão: A incidência de fratura de clavícula é maior em homens jovens, ocasionada principalmente por acidentes automobilísticos, sendo, na maioria dos casos, localizada no terço médio. Não foi encontrada significância estatística entre os dados do material de síntese e o índice de complicação pós-operatória, revelando a ausência de superioridade de risco entre os diferentes tipos de abordagem cirúrgica. Nível de Evidência IV, Série de Casos.

Synthesis of Dipyridylaminoperylenediimide-Metal Complexes and Their Cytotoxicity Studies.

A new family of perylenediimide (PDI) silver and copper complexes has been successfully synthesized by reacting ortho- and bay-substituted (dipyrid-2',2″-ylamino)perylenediimide ligands with metal phosphine fragments. The coordination of the metal center did not reveal a significant effect on the photophysical properties, which are mainly due to the PDI ligands, and in some cases quenching of the luminescence was observed. The antiproliferative effect of the free perylenediimide ligands and the metalloPDI complexes against the cervix cancer cell line HeLa was determined by MTT assay. The free perylenediimide ligands exhibited a moderate cytotoxic activity, but the coordination of silver or copper to the dypyridylamino fragment greatly enhanced the activity, suggesting a synergistic effect between the two fragments. In attempts to elucidate the cellular biodistribution of the PDIs and the complexes, a colocalization experiment using specific dyes for the lysosomes or mitochondria as internal standards revealed a major internalization inside the cell for the metal complexes, as well as a partial mitochondrial localization.

Altering singlet fission pathways in perylene-dimers; perylene-diimide versus perylene-monoimide.

We used a systematic approach to shed light on the inherent differences in perylenes, namely monoimides versus diimides, including coplanarity and dipole moment, and their impact on singlet fission (SF) by designing, synthesizing, and probing a full fledged series of phenylene- and naphthalene-linked dimers. Next to changing the functionality of the perylene core, we probed the effect of the spacers and their varying degrees of rotational freedom, molecular electrostatic potentials, and intramolecular interactions on the SF-mechanism and -efficiencies. An arsenal of spectroscopic techniques revealed that for perylene-monoimides, a strong charge-transfer mixing with the singlet and triplet excited states restricts SF and yields low triplet quantum yields. This is accompanied by an up-conversion channel that includes geminate triplet-triplet recombination. Using perylene-diimides alters the SF-mechanism by populating a charge-separated-state intermediate, which either favors or shuts-down SF. Napthylene-spacers bring about higher triplet quantum yields and overall better SF-performance for all perylene-monoimides and perylene-diimides. The key to better SF-performance is rotational freedom because it facilitates the overall excited-state polarization and amplifies intramolecular interactions between chromophores.

Quadrupolar Ultrafast Charge Transfer in Diaminoazobenzene-Bridged Perylenediimide Triads.

Strong push-pull interactions between electron donor, diaminoazobenzene (azo), and an electron acceptor, perylenediimide (PDI), entities in the newly synthesized A-D-A type triads (A=electron acceptor and D=electron donor) and the corresponding A-D dyads are shown to reveal wide-band absorption covering the entire visible spectrum. Electrochemical studies revealed the facile reduction of PDI and relatively easier oxidation of diaminoazobenzene in the dyads and triads. Charge transfer reversal using fluorescence-spectroelectrochemistry wherein the PDI fluorescence recovery upon one-electron oxidation, deterring the charge-transfer interactions, was possible to accomplish. The charge transfer state density difference and the frontier orbitals from the DFT calculations established the electron-deficient PDI to be an electron acceptor and diaminoazobenzene to be an electron donor resulting in energetically closely positioned PDIδ- -Azoδ+ -PDIδ- quadrupolar charge-transfer states in the case of triads and Azoδ+ -PDIδ- dipolar charge-transfer states in the case of dyads. Subsequent femtosecond transient absorption spectral studies unequivocally proved the occurrence of excited-state charge transfer in these dyads and triads in benzonitrile wherein the calculated forward charge transfer rate constants, kf , were limited to instrument response factor, meaning >1012  s-1 revealing the occurrence of ultrafast photo-events. The charge recombination rate constant, kr , was found to depend on the type of donor-acceptor conjugates, that is, it was possible to establish faster kr in the case of triads (∼1011  s-1 ) compared to dyads (∼1010  s-1 ). Modulating both ground and excited-state properties of PDI with the help of strong quadrupolar and dipolar charge transfer and witnessing ultrafast charge transfer events in the studied triads and dyads is borne out from the present study.

Excited State Charge Separation in an Azobenzene-Bridged Perylenediimide Dimer - Effect of Photochemical Trans-Cis Isomerization.

Photoinduced charge transfer and separation events in a newly synthesized azobenzene-bridged perylenediimide-dimer (PDI-dimer) are demonstrated. Trans-to-cis conversion (∼50 % efficiency) from the initial trans PDI-dimer by 355 nm pulsed laser light, and its reversal, cis-to-trans, process by 435 nm laser light irradiation has been possible to accomplish. Efficient fluorescence quenching in the PDI-dimer, more so for the cis isomer was witnessed, and such quenching increased with increasing solvent polarity. DFT-calculated geometry and electronic structures helped in visualizing the charge transfer in the PDI-dimer in both isomeric forms, and also revealed certain degree of participation of the azobenzene entity in the charge transfer events. Femtosecond transient absorption spectral studies confirmed occurrence of both charge transfer followed by charge separation in the studied PDI-dimer in both trans and cis forms in polar solvents, and the evaluated time constants from Global target analysis revealed accelerated events in the cis PDI-dimer due to proximity effects. The present study offers key insights on the role of the azobenzene bridge, and the dimer geometry in governing the excited state charge transfer and separation in symmetrically linked PDI dimer.

Unveiling the Photoinduced Electron-Donating Character of MoS2 in Covalently Linked Hybrids Featuring Perylenediimide.

The covalent functionalization of MoS2 with a perylenediimide (PDI) is reported and the study is accompanied by detailed characterization of the newly prepared MoS2 -PDI hybrid material. Covalently functionalized MoS2 interfacing organic photoactive species has shown electron and/or energy accepting, energy reflecting or bi-directional electron accepting features. Herein, a rationally designed PDI, unsubstituted at the perylene core to act as electron acceptor, forces MoS2 to fully demonstrate for the first time its electron donor capabilities. The photophysical response of MoS2 -PDI is visualized in an energy-level diagram, while femtosecond transient absorption studies disclose the formation of MoS2 .+ -PDI.- charge separated state. The tunable electronic properties of MoS2 , as a result of covalently linking photoactive organic species with precise characteristics, unlock their potentiality and enable their application in light-harvesting and optoelectronic devices.

Perylene-Monoimides: Singlet Fission Down-Conversion Competes with Up-Conversion by Geminate Triplet-Triplet Recombination.

Triplet-excited-state energies of perylene-monoimides (PMIs) lie in the range 1.12 eV ± 2 meV when compared to singlet-excited-state energies of about 2.39 eV ± 2 meV; therefore, the corresponding naphthalene-linked PMI-Dimer was investigated as a novel singlet-fission (SF) material. Ultrafast transient absorption measurements demonstrated the (S1S0)-to-1(T1T1) transformation and the involvement of a mediating step in the overall 1(T1T1) formation. The intermediate is a charge-transfer state that links the initial (S1S0) with the final 1(T1T1), and imposes charge-transfer character on both, which are thus denoted (S1S0)CT and 1(T1T1)CT. At room temperature, the decorrelation and stability of 1(T1T1)CT is affected by the geminate triplet-triplet recombination (G-TTR) of the two triplets. Independent confirmation for G-TTR to afford up-converted (S1S0)UC in fsTA and nsTA measurements with PMI-Dimer, came from probing PMI-Monomer (T1)s in triplet-triplet annihilation up-conversion (TTA-UC). The G-TTR channel, active in the PMI-Dimer at room temperature, is suppressed by working at either low temperatures (∼140 K) or in polar solvents (benzonitrile): Both scenarios assist in stabilizing (T1T1)CT. As a consequence, the triplet quantum yields are 4.2% and 14.9% at room temperature and 140 K, respectively, in 2-methyltetrahydrofuran.

Perylenediimides as more than just non-fullerene acceptors: versatile components in organic, hybrid and perovskite solar cells.

Recent reviews have highlighted the use of perylenediimides (PDIs) as non-fullerene acceptors in bulk-heterojunction organic photovoltaic devices. This review is focused on the advances in the incorporation of PDIs as photoactive components in different solar cell devices. An impressive number of perylenediimides have been incorporated into p-n organic solar cells, as non-fullerene acceptors in bulk heterojunction solar cells, as photosensitisers in dye-sensitised solar cells, in perovskite solar cells, and also as interlayers acting as either electron- or hole-transporting materials. All of this has led to devices with outstanding photovoltaic performance and these are described in this review.

Distance Matters: Effect of the Spacer Length on the Photophysical Properties of Multimodular Perylenediimide-Silicon Phthalocyanine-Fullerene Triads.

A multimodular donor-acceptor conjugate featuring silicon phthalocyanine (SiPc) as the electron donor, and two electron acceptors, namely tetrachloroperylenediimide (PDI) and C60 , placed at the opposite ends of the SiPc axial positions, was newly designed and synthesized, and the results were compared to the earlier reported PDI-SiPc-C60 triad. Minimal intramolecular interactions between the entities was observed. Absorption, fluorescence, computational and electrochemical studies were performed to evaluate the excitation energy, geometry and electronic structure, and energy levels of different photoevents. Steady-state absorption, fluorescence and excitation spectral studies revealed efficient singlet-singlet energy transfer from 1 PDI* to SiPc in the PDI-SiPc dyad and the PDI-SiPc-C60 triad. The measured rates for these photochemical events were found to be much higher than those reported earlier for the triad, due to closer proximity between the PDI and SiPc entities. The distance also affected the charge separation path in which involvement of PDI, and not C60 , in charge separation in the present triad was witnessed. The present investigation brings out the importance of donor-acceptor distances in channeling photochemical events in a multimodular system.

Multiple Xanthogranulomas in an Adult Patient with Myelodysplastic Syndrome.

Adult multiple xanthogranuloma (XG) is a rare late-onset variant of juvenile XG. It is characterized by the appearance of papules or nodules located preferably on the trunk. A case of a 54-year-old man with myelodysplastic syndrome is presented as a history of interest, who consulted due to the appearance of multiple brownish papules distributed mainly in the trunk. So far, there are only 22 cases of this clinical form reported in the literature, 9 of them associated with malignant hematological processes. We highlight the importance of this entity as a possible cutaneous marker of blood dyscrasias.